传统的制刷工艺，在刷辊或刷板的表面冲孔后，使用马钉植毛机将刷毛一束一束地植入刷辊或刷板，用这种工艺制做出来的毛刷产品应用面最为广泛，一是造价较低，毛刷做为易耗品，成本是必须要考虑的。但马钉植毛做成的刷辊有几个缺点：一是密度不够，因为冲孔植毛的每个孔之间必须要有一定的间距，有间距就无法植出高密度的效果，在一些特殊行业要求高密度刷辊来作业时就不能用这种马钉机植毛的刷辊；二是刷丝的结合力牢度不够，所谓马钉植毛法就是采用铁丝通过一个凸槽被压成“U”型扣，用来扣住刷丝后植入冲好的孔内，“U”型扣在孔中交叉后深入孔内卡牢，从而使刷丝结合在辊轴上，但拉力是有限的，如果在一些特殊的行业需要高转速进行作业的刷辊上，这种工艺来制作便不理想。

The most traditional brushing process, after punching the surface of the brush roll or brush plate, uses the horse nail wool planter to implant the brush bristles one by one into the brush roll or brush plate. The brush products made by this process have the most extensive application. First, the cost is low, and the brush is a consumable product, so the cost must be considered. But the brushing roller made lanqiujia.07858.netlanqiujiaa.07858.netbagan.07858.netwudaodiban.07858.netwutaidiban.07858.net

chenban.07858.netof horse nail wool planting has several shortcomings: first, the density is insufficient, because there must be a certain distance between each hole of punching wool planting, there is a space between them can not produce high-density effect, in some special industries, when high-density brushing roller is required to work, the brushing roller can not be planted with this horse nail machine; second, the bonding fastness of brushing is insufficient, so-called horse nail wool planting method is mining. The wire is pressed into a "U" button through a convex groove, which is used to hold the brush wire and implant it into the punched hole. The "U" button crosses the holes and goes deep into the hole, so that the brush wire is bonded to the roll shaft, but the pulling force is limited. If the brush roll needs high speed operation in some special industries, this process is not ideal.