广泛应用于各种行业中：1、冷轧板和镀锌/镀锡板材加工以前及金属表面的后整理
Widely used in a variety of industries: 1. Cold-rolled and galvanized/tinned sheets before processing and metal surface finishing
2、机械加工后去除毛刺和倒角
2. Removing burrs and chamfers after machining
3、冰箱压缩机/空调压缩机零件的精整处理
3. Refrigerator Compressor/Air Conditioning Compressor Parts Finishing
4、铜带/铝带卷材表面后整理
4. Surface Finishing of Copper/Aluminum Strip Coil
5、电子线路板中铜板的去污和研磨压
5. Decontamination and grinding of copper plates in electronic circuit boards
6、汽车齿轮加工/发动机零件的去毛刺电镀及涂装前的表面研磨
6. Deburring Electroplating of Automotive Gear Processing/Engine Parts and Surface Grinding before Coating
7、铸件的表面打磨、深孔/相关孔去毛刺
7. Surface grinding, deep hole/related hole deburring of castings
8、军事武器清洗
8. Military Weapons Cleaning
9、木工/三夹板表面整理/复杂家具木材纹目的突出加工/凹凸曲面打磨作业
9. Woodworking/Three-plywood Surface Finishing/Complex Furniture Wood Texture Protruding Processing/Convex Surface Grinding
10、液压件缸套表面端子表面抛光
10. Surface Polishing of Cylinder Liner Surface Terminals for Hydraulic Parts
工业应用
Industrial application
圆盘刷在工业上，一般有四类应用，归结到一点就是，为了获得需要的工件表面的精整效果。所以，圆盘抛光刷主要任务就是工件的表面加工。下面具体来看一下分别有哪四类:
In industry, disc brushes are generally used in four kinds of applications. To sum up, in order to obtain the required surface finishing effect of the workpiece. Therefore, the main task of the disc polishing brush is the surface processing of the workpiece. Now let's look at the four categories:
缎面修饰：缎面修饰就是使用软而细的抛光毛刷，将零件表面刷成无光缎面的漫反射层的处理过程，它可以使零件表面获得非镜面般的闪烁光泽。
Satin surface modification: Satin surface modification is the process of using a soft and fine polishing brush to brush the part surface into a diffuse reflective layer of matte satin, which can make the part surface obtain a non-mirror-like shine.
表面清理：主要用圆盘抛光刷清理零件表面的氧化皮、锈蚀、旧油漆层、焊渣及其他污物，也用于刷去零件被侵蚀后残留的浮灰。
Surface cleaning: It mainly uses the disc polishing brush to clean the oxide skin, rust, old paint layer, welding slag and other dirt on the surface of the parts, and also to remove the floating ash after the parts have been eroded.
丝纹刷光：在零件表面用圆盘抛光刷刷出一定规律的、细密的丝纹，如：波浪纹、鱼鳞纹等，以达到装饰目的。
Filament brushing: In order to achieve decorative purposes, the surface of parts is polished with a disc brush to brush out regular and fine filaments, such as wavy lines, fish scale lines, etc.
去除毛刺：通过刷光去除机加工后零件表面棱边上的毛刺。这也是圆盘抛光刷在工业上应用自以为广泛的一类。
Remove burrs: Remove burrs on edges of machined parts by brushing. This is also a kind of disc polishing brush which is widely used in industry.