钢丝刷特别是钢丝刷辊通常应用于钢材或铝业表面处理厂，shi由一系列 的不锈钢丝刷辊安装在全自动高速运转的毛刷抛光机（刷光机）上。钢丝刷辊以与轧件运动相反的方向在板带的上下表面高速旋转刷去氧化铁皮。刷掉的氧化铁皮采用封闭循环冷却水冲洗系统冲掉。一般卷线材的使用厚度为1.09-6.35mm，钢丝刷子的更新周期为每生产2万t薄板或4万t钢卷更新一次。
Wire brushes, especially wire brush rollers, are usually used in steel or aluminium surface treatment plants. Shi is installed on a full-automatic brush polishing machine (brush polisher) with high-speed operation by a series of stainless steel wire brush rollers. The steel wire brush roll rotates at high speed on the upper and lower surfaces of the strip in the direction opposite to the movement of the rolled piece to remove the oxide scale. Scrubbed iron oxide sheet is washed out by closed circulating cooling water flushing system. Generally, the thickness of coil wire is 1.09-6.35 mm, and the renewal cycle of wire brush is 20,000 t thin plate or 40,000 t coil.
不锈钢超细弹力钢丝刷专用于清洗陶瓷网纹辊，这是由于陶瓷的硬度远大于钢丝硬度，钢丝刷不会损伤网纹辊辊面陶瓷层。超细弹力铜丝刷是用于清洗镀铬金属网纹辊、凹印版辊的常用必备清洗工具，配合使用清洗剂效果更佳。
Stainless steel ultra-fine elastic steel wire brush is specially used for cleaning ceramic mesh roller. This is because the hardness of ceramics is much greater than that of steel wire. The steel wire brush will not damage the ceramic layer on the surface of the mesh roller. Ultra-fine elastic copper wire brush is a common and necessary cleaning tool for chromium-plated metal mesh roll and gravure plate roll, and the effect of cleaning agent is better.
常用规格6*14或5*14个孔，钢丝材质304不锈钢丝或普通钢丝都可。每个孔通常为5根根对折植入，钢丝伸出长在20mm左右。普通钢丝制成的刷子容易生锈，不经用，较之304不锈钢丝制成的木柄钢丝刷品质上相差太多。
Commonly used specifications 6*14 or 5*14 holes, steel wire material 304 stainless steel wire or ordinary steel wire can be. Each hole is usually implanted with 5 roots folded in half, and the steel wire extends about 20 mm. The brushes made of ordinary steel wire are easy to rust and unused, which are much different from those made of 304 stainless steel wire in quality.
钢丝管道刷一般用于工业管道，机械螺孔清理除锈，抛光清扫作用，管道刷工艺采用钢丝或不锈钢丝夹在两股铁丝或四股铁丝中间用机械扭制而成.
Wire pipeline brushes are generally used for industrial pipelines, mechanical screw hole cleaning and rust removal, polishing and cleaning. The pipeline brushing process is made by mechanical twisting of steel wire or stainless steel wire clamped between two or four strands of wire.
